Call Us

+91 7207656656

Email Us

info@adityascientific.com

Slide background

Rotary Evaporator - Rotavapor - Auto Control & Digital Display

Our Products

Our Products

ADITYA rotary evaporators are just what you need to conduct evaporation in your laboratory. Our products are suitable for automatic, standard, and complex distillation. We have developed our evaporators keeping in mind the convenience, safety, and running-cost.

Our unique rotary evaporator products have plenty of advantages. For example, all our evaporators are equipped with a separate ON/OFF switch for heating function. Key aspects of our rotary evaporators have been improved to provide ergonomic and functional designs.

Rotary Evaporator

1. RE-2 Evaporator:

Our RE-2 evaporator is designed for purification and distillation tests. It rotates and shapes a thin film in negative pressure conditions by heating, and condensing, the waste solvent is collected in a separate container, which can be reused later. Through our RE-2 evaporator, products can be transformed into system devices.

Features: -

  • Comes with an integrated Combi-Clip.
  • Equipped with an LED rotation speed setting.
  • Comes with a electronic speed control rotation drive.
  • Equipped with a vapour tube that can be easily removed for cleaning purposes.
  • Comes with a safety protection switch to avoid overheating.
  • Has a flexible bath position
  • Sealing Ring : Graphite filled PTFE
  • Ceramic coated heating bath
  • Manual lift type.
  • Equipped with a secondary protection cut off switch.

Technical Specifications: - 

Description RE2
Lift Type Manual
Condenser Type Vertical/Horizontal
Rotation Speed (RPM) 20-320
Vapour Tube Single piece with Sleeve for Easy Removal
Integrated Combi-Clip Yes
Suitable flask size (ml) 50-5000 ml
Rotation speed setting LED Display
Motor Power (W) 60
Heating Capacity (W) 1300
Total Power (W) 1360
Temperature Range (oC) 20 – 210
Temperature Accuracy (oC) 1
Overheat Protection Safety cutoff over +5 (oC)
Temperature Setting Digital LED
Temperature Control Electronic PID Control
Secondary Protection Cutoff 250oC
Material Heating Bath Ceramic Coated / SS316L
Volume Heating bath (L) 4.5L - Dia 255mm Suitable 50- 5000ml
Bath Position Flexible to extend to suit flask size
Sealing ring Graphite filled PTFE
Power Supply 230 VAC, 50Hz

2. RE-2A Evaporator:

Our RE-2A evaporator is designed for purification and distillation tests. It rotates and shapes a thin film in negative pressure conditions by heating, and condensing, the waste solvent is collected in a separate container, which can be reused later. Through our RE-2A evaporator, products can be transformed into system devices. The RE2A Evaporator has an automatic lift type and is more powerful.

Features: -

  • Comes with an integrated Combi-Clip.
  • Equipped with an LED rotation speed setting.
  • Comes with a electronic speed control rotation drive.
  • Equipped with a vapour tube that can be easily removed for cleaning purposes.
  • Comes with a safety protection switch to avoid overheating.
  • Has a flexible bath position
  • Sealing Ring :Graphite filled PTFE
  • Ceramic coated heating bath
  • Automatic lift type.
  • Total power of 1360 watts
  • Equipped with a secondary protection cut off switch.

Technical Specifications: - 

Description RE2A
Lift Type Automatic
Condenser Type Vertical/Horizontal
Rotation Speed (RPM) 20-320
Vapour Tube Single piece with Sleeve for Easy Removal
Integrated Combi-Clip Yes
Suitable flask size (ml) 50-5000 ml
Rotation speed setting LED Display
Rotation Driver Electronic Speed Control
Motor Power (W) 60
Heating Capacity (W) 1300
Total Power (W) 1360
Temperature Range (oC) 20 – 210
Temperature Accuracy (oC) 1
Overheat Protection Safety cutoff over +5 (oC)
Temperature Setting Digital LED
Temperature Control Electronic PID Control
Secondary Protection Cutoff 250oC
Material Heating Bath Ceramic Coated / SS316L
Volume Heating bath (L) 4.5L - Dia 255mm Suitable 50- 5000ml
Bath Position Flexible to extend to suit flask size
Sealing ring Graphite filled PTFE
Power Supply 230 VAC, 50Hz

3. Rotary Evaporator, Model RE20

The RE20 lab rotary machine comes with a compact modular design that keeps operating cost to a low minimum without compensating on performance.

Features: -

  • This evaporator comes with a temperature switch to optimally control the distilling processes.
  • Automatic cut off system to avoid over heating.
  • Floating Evaporating Flask design to avoid vertical movement of Heating Bath.

Technical Specifications: - 

Control Unit
01 Operating Voltage (control unit) 230 V 50/60 Hz
02 Vacuum valve (system) Yes
03 Aerating valve (system) Yes
04 Vacuum sensor Yes
05 Automatic vacuum control mode Yes
06 Vapor temperature Yes
Body
01 Dimensions (LxDxH) 1120x750x1250
02 Reflux system Yes
03 Condenser Cooling Area 1.2 sqm
04 Distillate flask 20L X 1 No.
05 Receiver Flask 10L X 1 No.
06 Flask neck Large core diameter (standard 120 mm)
Motor unit
01 Rotating Speed 120 rpm
02 Electronic speed control Yes
03 Electronic load control Yes
04 Temperature safety switch Yes
05 Slow acceleration mode Yes
Bath
01 Operating Voltage (bath) 440V / Three Phase
02 Heating element 4 KW
03 MOC of heating bath Stainless steel SS316
04 Heating Bath Insulated
05 Heating Bath temp Range 20-100°C (option 20-160°C)
06 Over temperature limiter (heating element) Yes
07 Adjustable over temperature thermostat) Yes
08 Electronic temperature thermostat Yes
09 Bath Design Fixed Heating Bath, Floating Evaporating Flask design to avoid Up & Down movement of Heating Bath.
Sealing system
01 Sealing system vacuum stability Ultimate vacuum (system empty) better than 1 mbar
02 Life expectancy (sealing system) Approx. 20,000 running hours.
03 Warranty (sealing system) 3 years

Application: -

  • The RE20 lab rotary machine is used to recover solvents
  • Distillation of high-boiling solvents
  • Drying of powders

4. Rotary Evaporator, Model RE50

The RE50 gives you the option of operating the products either in manual or automatic mode. It has a rotation speed of 10-60 rpm and heating bath temperature of 20-210 °C. This evaporator is also equipped with a cut-off system that prevents the machine from overheating.

Features: -

  • An Automatic vacuum control mode
  • Equipped with a vacuum valve
  • A Heating Capacity of 8 KW
  • Precision models of the RE50 have an integrated vacuum control
  • The RE50 has an evaporating flask size 50 L.

Technical Specifications: - 

Control Unit
01 Operating Voltage (control unit) 230 V 50/60 Hz
02 Vacuum valve (system) Yes
03 Aerating valve (system) Yes
04 Vacuum sensor Yes
05 Automatic vacuum control mode Yes
06 Vapor temperature Yes
Body
01 Dimensions (LxDxH) 1400x900x1250 [Approx. Size]
02 Reflux system Yes
03 Condenser Cooling Area 1.2 sqm
04 Distillate flask 50L X 1 No.
05 Receiver Flask 20L X 1 No.
06 Flask neck Large core diameter (standard 120 mm)
Motor unit
01 Rotating Speed 60 rpm
02 Electronic speed control Yes
03 Electronic load control Yes
04 Temperature safety switch Yes
05 Slow acceleration mode Yes
Bath
01 Operating Voltage (bath) 440V / Three Phase
02 Heating element 8 KW
03 MOC of heating bath Stainless steel
04 Heating Bath Insulated
05 Heating Bath temp Range 20-100°C (option 20-160°C)
06 Over temperature limiter (heating element) Yes
07 Adjustable over temperature thermostat) Yes
08 Electronic temperature thermostat Yes
Sealing system
01 Sealing system vacuum stability Ultimate vacuum (system empty) better than 1 mbar
02 Life expectancy (sealing system) Approx. 20,000 running hours.
03 Warranty (sealing system) 3 years

Application: -

  • The RE20 lab rotary machine is used to recover solvents
  • Distillation of high-boiling solvents
  • Drying of powders

5. Rotary Evaporator, Model RE100

The RE100 Rotary Evaporator comes with reflux system that prevents wastage of liquid by allowing the liquid to flow back into the original flask. The motor unit comes with an electronic speed and an automatic vacuum control system. The bath comes with an electronic temperature thermostat that cuts off when temperature go up to very high limits.

Features: -

  • Available in Dimensions (LxDxH) of 1700 x 1000 x 1250 mm
  • Features an automatic vacuum control mode
  • Motor has a rotating speed of 60 rpm
  • Features an electronic speed and load control system
  • Equipped with an insulated heating bath

Technical Specifications: - 

Control Unit
01 Operating Voltage (control unit) 230 V 50/60 Hz
02 Vacuum valve (system) Yes
03 Aerating valve (system) Yes
04 Vacuum sensor Yes
05 Automatic vacuum control mode Yes
06 Vapor temperature Yes
Body
01 Dimensions (LxDxH) 1700 x 1000 x 1250 mm
02 Reflux system Yes
03 Condenser Cooling Area 1.6 sqm
04 Distillate flask 100L X 1 No.
05 Receiver Flask 50L X 1 No.
06 Flask neck Large core diameter (standard 120 mm)
Motor unit
01 Rotating Speed 60 rpm
02 Electronic speed control Yes
03 Electronic load control Yes
04 Temperature safety switch Yes
05 Slow acceleration mode Yes
Bath
01 Operating Voltage (bath) 440V / Three Phase
02 Heating element 12 KW
03 MOC of heating bath Stainless steel
04 Heating Bath Insulated
05 Heating Bath temp Range 20-100°C (option 20-160°C) (option 20 - 220°C)
06 Over temperature limiter (heating element) Yes
07 Adjustable over temperature thermostat) Yes
08 Electronic temperature thermostat Yes
Sealing system
01 Sealing system vacuum stability Ultimate vacuum (system empty) better than 1 mbar
02 Life expectancy (sealing system) Approx. 20,000 running hours.
03 Warranty (sealing system) 3 years

Application: -

  • The RE20 lab rotary machine Is used to recover solvents
  • Distillation of high-boiling solvents
  • Drying of powders
 
More Equipment

Our Products

AD2C pump is our first and most popular chemistry diaphragm pump, and is at the heart of ADITYA pumping systems.

Read More

Aditya Scientific recirculating chillers are the ideal solution when you need precise temperature control.

Read More

There is a complete range of Aditya Scientific magnetic stirrers to handle various quantities, heating capabilities.

Read More

Back To Top